networking's questions - Danish 1answer

24.042 networking questions.

A picture of my network topology is included below. I have a few servers I want exposed to the internet. These are behind a Linksys router/firewall with a public IP and a LAN address of 192.168.11....

I've installed Bria 4 on Windows 7 pc. I've got a 15MbPS broadband connection. The Bria on my PC fail to register with this network. However if I connect to VPN server(hide.me), with the broadband ...

I have a small and harmless issue; I only have one Ethernet connection through which I access my home network and the Internet. One time I rebooted the router and now in the Windows 10 Settings Panel ...

I don't have a static IP but it seems my internet provider never changed my ip address. I am setting up a vpn server and it will be used by myself only. I know the benefit of using dynamic DNS ...

I have configured a network with the following topology: Gateway (10.0.0.1) | tun0 | |-----------------------| 10.0.0.0/16 | | | tun0 ...

Every day I spend almost 2 hours on a train to my job and back. My current cellular provider gives me a terrible service most of the time within the train. I'd like to buy/borrow sim cards of all ...

Is there any specific Windows 10 process that triggers the assigning of an IP address? Which part of the registry is responsible for the IP address? I am currently using Windows 10 and I am looking at ...

I need to open ports on a firewall, so that a client can access his VM console through vCenter server's Web Client. I had a look at this page about port description, but I am a little confused. I ...

This is a new issue that was not caused by any router settings changes that i'm aware of. I've had an extensive look and been completely overloaded by acronyms and talk of buffer bloat! As soon as ...

When trying to connect to our Win 2012 R2 Terminal Server via RDC, the connection process gets to the "estimating connection quality" step and just disconnects. The Terminal Server was working all ...

I'd like to get .local addresses (such as test.local) to point to 127.0.0.1 but it isn't working. I'm on latest Ubuntu. In /etc/NetworkManager/NetworkManager.conf I commented out dns=dnsmasq then did ...

I want to install flows proactively in mininet , I have used topo_proactive and discovery module in pox controller, but there is no communication when I ping. Is there any other module or any other ...

I have a wireless router running DD-WRT (the latest version) and I set it up to be a Repeater Bridge to function as a second router, which means I had to change the Local IP Address and change the ...

I am trying to configure an interface to allow internet connection on a home server which runs Debian 6 x86. The server is behind a router which has DHCP enabled. The router IP is 192.168.1.1 with ...

Cant ssh into host apple computer & cant ping I can screen share host via ARD I can ssh other computers from my remote computer I can copy files to host via ARD ssh computer's from host host ...

While I was adding my public ssh key to my server I noticed that .fios-router.home comes up at the end of my key file. Where your computer name is. Why does it do this? Operating system = (Mac OS) ...

I have run ipconfig /all, which tells me DHCP is enabled, meaning I should have a dynamic IP address. However, no matter how many times I restart the modem, I end up with the same IP address. What am ...

(Running Windows 7) This is one of the entries I have in my Windows' etc/hosts file 127.0.0.1 localhost mysite.mike mysite.local First I noticed that my browser takes always 2.01-2.04s (so 2 seconds)...

I need to stream a single windowed application on a Windows 7 PC to another Windows PC, so that the other Windows PC can see that application and, preferably, interact with it. But all I want it to ...

I have installed squid3.1.19 and divert all traffic from our network to proxy server from mikrotik router. mikrotik router is the final gateway for our network. After I configure squid, internet ...

I am attempting to run a relay node on my Kali Linux VM. It appears like everything is working. I started it with systemctl and the service is active. I looked up my public IP on https://metrics....

I have a netgear WNDR4500v2 router, which for the last several months has been having strange DNS-related(?) issues. For several months, routerlogin.net and http://192.168.1.1 (the current gateway) ...

I have recently started using a Windows-10 virtual machine (VMWare 6.0.7) and it is behaving satisfactorily in all respects (so far as I can tell) including access to network shared drives and the ...

The problem is, somebody comes to my house, I give them the wireless password. Then, whatever they try to open in their browser, instead they see my WAP's admin-logon screen! If I set them up with a ...

I would like to be able to ssh tunnel into a machine that is connected to a VPN at work. Setup Machine A - Creates the SSH tunnel in Machine B Machine B - Connects to the work VPN Situation ╒═════...

I am looking for a way to automatically backup and archive certain files on my hard drive to a NAS in Windows 10 pro 64bit. By that I mean that I can add files to the directory on my disk and it will ...

When I do netstat -a on my Windows machine, I get a listing of the ports with one of the four states: - LISTENING - CLOSE_WAIT - TIME_WAIT - ESTABLISHED What do CLOSE_WAIT and TIME_WAIT mean/...

I have a new machine with an Asus ROG STRIX H370I main board, with an Intel 2x2 802.11ac wi-fi with MU-MIMO support. My cable connection speed is around 800-900 Mbps (both upstream and downstream), ...

So i tried to use my android phone that is connected to a wifi, and used a wifi sharing app called (Netshare), to tether the internet to my mac(wirelessly). The internet worked, the browser works and ...

I have a Windows 7 computer with two users. One of them is Administrator the other is limited user. Limited user should have access to the internet but should not have access to any network shares of ...

Currently I am on LAN network and I have tried to setting up LAN setting but I do not know my proxy server IP. I Googled but I get only information related how setting up proxy server but I can not ...

HJi, here is my configuration: I've a fritz router (the root ), and use a powerline to connect it to another room. To the second power point I've connected a Dlink g624t to create a wifi network in ...

I'm connected to a wireless network, yet in the taskbar the icon is showing that I'm connected to a wired network. Why is that? There is no network cable connected to the laptop, and it says "Limited" ...

I notice when I send udp packets from computer A to computer B, B can receive the upd packets correctly but if I send udp packets from computer B to computer A the udp packets are not received A and ...

Any easy way to Create Azure VM with domainNames with Azure CLI? Seem to me the steps are rather complicated in https://docs.microsoft.com/en-us/azure/virtual-machines/linux/create-cli-complete ...

If I ping my desktop (Connected via LAN cable) from laptop (Connected via Wifi) with Static IPv4 it says Destination host unreachable both computer are windows 7 and connected to the same router (D-...

Lately I've been seeing the status message "Connecting" in Chrome's status bar while (several) websites were taking minutes to load, often resulting in a timeout error. With enough patience, the site ...

I want to connect Ubuntu (on VMware Workstation 11.0) via SSH (from Windows 10) but I can't: Ubuntu (on VMware) and Windows can ping each other; SSH server is on (systemctl status ssh .... activate); ...

I have a 2 part question: I have dual booted Centos 7 with windows 10. Once Centos 7 setup is finished No WiFi connection is available. In settings > Wifi it gives the message: No WiFi adapter ...

My internet connection used to be a direct LAN connection to my provider. Back then, everything would load fine on both Windows and Ubuntu (dual boot). However, a while ago they started needing me to ...

I had my desktop windows 7 computer turned off for several days. After powering back up, it wants to apply "critical" windows updates, so I allowed update and the reboot. Network connections did not ...

I set up a DynDns account to point a domain to my dynamic IP server at home. From any "outside" network, the connection is working and pointing to my server. But when I point my browser to my URL (...

I am having trouble with my setup, basically close to same setup. 24port patch panel, switch, router, modem. But I am having issues. All my devices do not have internet connectivity except one ...

I've created an access point on a raspberry pi which users can connect to from their phones to access a local site on the pi. However, I'm trying to reduce the user flow from this: connect to wifi ...

I recently created a small office network with 10+ computers. 9 of them are desktop computers so I used Ethernet cable to connect them.. The computers are connected to a switch via a patch panel and ...

I have gone and: forgot the password to my remote windows server (with weeks worth of work backed up on it) changed the IP address of the remote windows server Now the only way possible that I can ...

On my computer I have access to two different networks. The main one (through the wireless NIC) is the one I need to be on 90% of the time. However I also have a USB to ethernet adapter that connects ...

I am having trouble understanding how ports work. What I tried to do: I wanted to check if a particular port was open on my laptop. The port that i chose to check was the port used by bittorrent ...

So, I have a laptop with CentOS 6.9 (i686 arch), I need to receive the internet signal through the wi-fi adapter and repeat it to the ethernet cable, how can I do this? Is there any way to do it?

I have two VPNs configured using OpenVPN. I can connect fine from the terminal but only when using sudo, e.g.: sudo openvpn ~/my-vpn/client.ovpn When I do not use sudo, I get the following error: ...

Related tags

Hot questions

Language

Popular Tags